I have for sale an aluminum ls block nothing is wrong with it just dont need it. Can be used for a mockup or build. It is a 5.3 ls4. This is an ALUMINUM block so its about 100 pounds lighter than the standard iron block. The bores are clean and is ready to be assembled. This was a 5.3 but you can use a 4.8 rotating assembly if you wanted to. I just dont need it any more I have too many projects...
I have for sale an aluminum ls block nothing is wrong with it just dont need it. Can be used for a mockup or build. It is a 5.3 ls4. This is an ALUMINUM block so its about 100 pounds lighter than the standard iron block. The bores are clean and is ready to be assembled. This was a 5.3 but you can use a 4.8 rotating assembly if you wanted to. I just dont need it any more I have too many projects...
last weekPeoria, IL+108 milesAuto Parts for Sale
Have a Brand NEW pair of SPEEDMASTER Big Block Chevrolet aluminum heads. 320cc runner, 119cc chambers, 2.25 intake and 1.88 exhaust. Selling bare as cast but can finish anyway you need them, depending on cam being used, etc. Can add valves, springs, retainers, locks, screw in studs and guide plates for added $$$ depending on your choice. Some of the best flowing heads on the market per dollar $...
last weekPeoria, IL+108 milesAuto Parts for Sale
1963 Ford Galaxie Ford FE 352 Engine Block C3AE-6015-H Came off 220HP model. It is in good condition and can be honed out for standard bore. The engine block for $250 obo.I have a few parts selling separately the 352 crankshaft for $50 obo ,the Ford FE water pump for $40 obo, Ford FE crank spacer for $30 oboFord FE oil filter adapter for $30 oboI can ship all these parts for an extra cost. Can ...
last weekRacine, WI+80 milesAuto Parts for Sale
MANY SBC PARTS E MAIL WITH NEEDS TO MANY TO LIST ALL. OIL PANS TO HEADS starters flex plates alternators cams heads flywheels ect. COMPLETE MOTOR IN PIC IS 1960 HO 283 WITH CAMEL HUMP HEADS NEEDS A PISTON FIRST $400 CASH TAKES WHOLE MOTOR
I have a 2.8l engine block from a 1996 328i. I was going to send this with the rest of the car to the scrap yard but thought someone might want this block for a core or build. It melted piston 3,4 and 6 and deposited a little aluminum on the cylinder wall but would still make an ideal block to build. Stock bore, engine had about 230,000 miles when it got hot and melted the pistons. Rods and cra...
Hoosier Quick Time Pro 28x11.5-15 BRAND NEW $350......save $175 TIRES ONLY1970 350 LT1 double hump heads 3927186 SBC dated B.17.0 and B.19.0 $600 1972 400 SBC heads 3973493 $150Factory stock SBC head bolts $50Factory stock SBC crank boltwasher $20Factory SBC lift brackets $30SBC 3 groove crank pulley $20Factory stock 716 BBC rocker arm studs set16 $40BBC 38 dimple rods. Correct for L78L89L72 39...
1969 engine numbers match only 2k on rebuild and balanced complete engine going larger. Air cleaner says 396 but is a 427 decal was to match whats on the fenders. This is a over counter replacement engine 427 - 512 block and 990 heads. Westmont, IL 60559
No internals. Block9854. Heads have new springs and are ready to go. 049 open chamber. Intake is 1966. Comes with stand and valve covers. Needs to be machined and built. Rare block...
days agoPeoria, IL+108 milesAuto Parts for Sale
GM 350 4 bolt main engine block. The block has new cam bearings and freeze plugs installed by local machine shop and was going to be rebuilt using the existing rods and pistons until it was found that the seller broke the skirt of one of the pistons during or after disassembly. Unless a another matched piston can be found the block is currently .040 over will need bored again due to a ridge in ...
I have a pair of 1970 small block Chevy 350 double hump heads 3927186 dated B.17.0 and B.19.0. No porting at all.They are perfect candidates for a 1970 LT1 Nova, Camaro or Corvette. They came off a running engine a few years ago.$600 plus shipping if needed.I WILL NOT RESPOND TO GENERIC IS THIS AVAILABLE TYPE QUESTIONS. IF YOURE INTERESTED, P,EASE SEND ME A LEGITIMATE QUESTION. Feel free to IM,...